FletchAir, Inc.

Fuel

Description Part# Item Desc Price
       
       

FUEL

401126-1

SUPERCEEDED TO

TAES2100-3

Electric Fuel Pump FAA/PMA Approved for all light single engine Grumman aircraft AA1 through the AA5B. These pumps are tested per the Grumman factory specs. Don't be fooled by the off the shelf electric fuel pumps. Those are not approved for installation on your certified aircraft. We maintain inspection records for over 10 years as required by the FAR's  
     
F501 24 volt AG5B Electric Fuel Pump. FAA-PMA FOR ALL AG5B  
     
479136 Gasket for above Electric Fuel Pumps  
     
F2031 Fuel filter for Electric Fuel Pumps 479729  
     
F203

Mechanical Fuel Pump 40925
Original pump used on AA1 - AA5B

CORE CHARGE APPLIES

 
     
F206 Fuel Selector valve O-Ring and lubricant 'kit'  
     
F507 Inboard Fuel Drain w/out extension
Pre '78 AA5 series
 
     
F207 Inboard Fuel Drain w/ extension
All AA1 and '78 - '79 AA5A/AA5B
 
     
F208 Outboard Fuel Drain All AA5
series and GA7
 
     
F511

Mechanical Primer for AA5
series FAA/PMA K2403-2

NO LONGER AVAILABLE DUE TO A HUGE SUPPLIER INCREASE. DO YOURSELF A FAVOR, MAINTAIN, CLEAN AND PROTECT YOUR PRIMER. LAST COST FOR THE PRIMER AS QUOTED FROM ESSEX PRECISION WAS 1041.00 EACH

 
     
F5110 Repair kit for Mechanical Primer  
     
F113 Float Balls for fuel gauge AA1
series (red) 401129-5
 
     
14-2 U-cup seal for AA1 fuel gauge  
     
F115 O-Ring for AA1 series Fuel tank end plate. If you try other suppliers for this item, expect to pay considerably more or see it back ordered. We keep these in stock because we care about our Grumman customers.  
     
5901009-1 Overhauled AA5 series fuel quantity
transmitter sold 'exchange' for core unit only
 
     
I5451 Gasket for AA5 series Fuel quantity
transmitter 5201001-9
 
     
F2083 O-Ring (Large) for 'flush type' Fuel cap  
     
F2084 O-Ring (small) for 'flush type' Fuel cap  
     
F20856

Fuel Cap 1969-1978 with fixed handle

NEW FAA-PMA APPROVED

 
     
F2085

Gasket for F20856 fuel cap

EASY TO REPLACE AND SHOULD BE. DONT WAIT TO REPLACE THESE AFTER THEY GET OLD AND CRACKED

 
       
FUEL TANK SEALANT F520

1 pint kit high adhesion kit For use inside fuel tank

Easy to use. 10 to 1 mixture ratio NEW LOWER PRICE

 
     
F521 1/2 pint kit high adhesion kit For use inside fuel tank  
F521 KIT 6oz with applicator tube. Mix it all at once.  
F524 6 oz. Sem kit, low adhesion sealant
For inspection plates (one Sem kit does 3 plates or 4 if you do it right)